RAPIDSHARE SEARCH ENGINE

Rapidshare is a file hosting goldmine if you know how to search it properly. for example: Try using follwoing code.

site:rapidshare.de inurl:ziprar7ziptar

Open google site. Put above line in search box, hit enter. You will get results of downloadable files with zip,rar,7zip and tar formats. inurl can be specified for finding files of specific format. e.g.

inurl:pdf
inurl:aviwmvmpgnva
inurl:mp3oggwma
inurl:exe
inurl:ziprar7ziptar

Now the following query will provide you direct link to download winrar software compressed in zip format.

site:rapidshare.de inurl:zip winrar

Rapidshare is one of the world’s biggest and the fastest file web hosts around the world with thousands of files being uploaded and downloaded everyday. But it does not have a search engine of its own, we can search files hosted at rapidshare and other many file hosting services directly using many resources out there as many many search engines are emerging to do this task.

Some of search engines which give you direct links of files hosted at such file hosting websites are following:

1. Avun
2. Filez
3. RapidFox
4. U2U
5. Zoozle
6. Rapidstack
7. FilesBot
8. Loadevery
9. Rapidoogle
10. Rapidzilla
11. SharingEngines
12. FilesTube
13. Xoogo
14. EatPaperRapidshare
15. RapidshareDB
16. File field
17. RapidshareURL
18. FileSearch
19. Leechaa
20. Quicksearch
21. jqd
22. MegaDownload
23. Rapidog
24. Search Any File
25. Crawl Rapidshare
26. Rapidor
27. Down2Crazy
28. rSearch
29. Download List
30. Search Files
31. Gappon
32. FileCrop
33. Search4file
34. Mega Rapid Search
35. Rapid Zearch
36. FileSearcher
37. Oneclickfiles
38. Rapidsharesearch
39. Funfail
40. Rapidshare1
41. 5iles
42. shufs
43. rapidsearch.eu
44. Kvaz
45. Files Pump
46. Search Rapidshare Files
47. Infobind
48. Search Rapidshare info
49. Javaartist
50. Coders2020
51. 4Chan
52. Rapidshare Blog Search
53. Linkosearch
54. HellaFiles
55. totme
56. ShareMiner
57. FileScoop
58. RapidSearchEngine
59. Betadir
60. RapidExplorer
61. RS Find
62. Rapidshare Index
63. RapidshareLink
64. Rapidshare Data
65. Buscador
66. Rapidshare Searcher
67. Peer2link
68. RapidOSearch
69. RapidShared
70. SearchShared
71. Rapidsearch.in
72. Rapidsharing
73. ProjectNinja
74. Rapidrat
75. Rapidlibrary

RAPIDSHARE DOWNLOAD ACCLERATOR

RapidShare is most widely used popular online file sharing hosting service. Free rapidshare account has limitations i.e. low bandwidth, difficult captcha etc. Still the number of files uploaded on Rapidshare is more then any other online file sharing website. One issue which users faces while downloading files from rapidshare is wait time and there is no free automated program for downloading set of rapidshare files. Rapidshare Plus is a solution.
It lets you download queue of rapidshare files automatically by just providing rapidshare links. Just add Rapidshare file links to Rapidshare Plus and rest of the downloading task will be done by Rapidshare Plus automatically.

• Add/Delete any number of File Links
• Add Proxy server setting
• Start/Stop Download Process
• Displays file download progress
• Time Remaining and Time elapsed display
• Current Download Speed display

http://rapidshare.com/files/152250390/RapidShare_Plus_-_RapidShare_File_Downloader.zip

Microsoft Word Hotkeys | Keyboard Shortcuts

Microsoft Word Hotkeys Keyboard Shortcuts

Keyboard Shortcut Result in Microsoft Word

CTRL and A
Selects all in the current document.

CTRL and B
Bold text.

CTRL and C
Copies the item or text to the Clipboard and can be pasted using CTRL and V.

CTRL and D
Displays the Font dialogue box.

CTRL and E
Centre Alignment.

CTRL and F
Displays the Find dialog box, to search the current document.

CTRL and G
Displays the Go to dialog box, to go to a specific location in the current document.

CTRL and H
Displays the Replace dialogue box.

CTRL and I
Italic text.

CTRL and J
Full Justification.

CTRL and K
Create Hyperlink

CTRL and L
Left Alignment

CTRL and M
Tab

CTRL and N
Creates a new document.

CTRL and O
Displays the Open File dialogue box.

CTRL and P
Displays the Print dialog box.

CTRL and R
Right Alignment.

CTRL and S
Displays the Save dialog box.

CTRL and U
Underline text

CTRL and V
Pastes the copied item or text from the Clipboard into the current position in the document.

CTRL and X
Cuts the item or text selected to the Clipboard.

CTRL and Y
Redo the last undone action.

CTRL and Z
Undoes the last action.

CTRL and ENTER
Insert Page Break.

CTRL and F2
Show Print preview.

CTRL and F4
Closes the active document window.

CTRL and F6
Opens the next document window.



Keyboard Shortcut Result in Microsoft Word

F1 key
Get help or use the Office assistant.

SHIFT and F1 Key
Context sensitive help.

F2 Key
Move text or image.

SHIFT and F2 Key
Copy Text.

F3 Key
Insert an auto text entry.

SHIFT and F3 Key
Change the case of the selected text.

F4 Key
Perform last action again.

SHIFT and F4 Key
Perform a Find or Go to action again.

F5 Key
Displays the Go to dialogue box, from here you can also Find and Replace.

SHIFT and F5 Key
Move to a previous revision.

F6 Key
Go to the next frame or pane.

SHIFT and F6 Key
Go to the previous frame or pane.

F7 Key
Launch the Spell checker.

SHIFT and F7 Key
Launch the Thesaurus.

F8 Key
Extend the current selection.

SHIFT and F8 Key
Shrink the current selection.

F9 Key
Update the selected fields.

SHIFT and F9 Key
Switch between a field code and it's result.

F10 Key
Activate the menu bar.

SHIFT and F10 Key
Display a Shortcut Menu. Same as right clicking.

F11 Key
Go to the next field.

SHIFT and F11 Key
Go to the previous field.

F12 Key
Save file As, equivalent to tools menu.

SHIFT and F12 Key
Save document, equivalent to tools menu.

PARTITIONING YOUR HARD DRIVE USING FDISK

Nobody wants to setup their hard drive as one giant data dump. Dividing your drive into multiple partitions makes mutitasking easier. Keeping different types of data such as work documents, mp3s, video files, etc in a partition separate from the operating system can greatly increase your computer’s performance. And if you are planning on using multiple operating systems then you will absolutely need multiple partitions.

What Is Partitioning ?
A partition can be assumed as a container, like one drawer of a file cabinet. Each partition uses a file system to store and name data. Windows 98 used FAT32 which allowed greater maximum partition sizes and stored data more efficiently than the FAT16 file system of DOS and Windows 95. Windows NT introduced NTFS file system, which offers better data security and efficient memory handling. Windows 2000 and XP can read and write to both NTFS and FAT32 partitions.

Partitioning Your Hard Drive Using FDISK

Follow these simple steps after runnning FDISK command in command prompt to partition your harddrive:

1. First, to view a list of all drives available on your system select (5).
2. Press (4) to view partition information on the drive, then select the new hard drive.
3. Select (1) to create a partition, then on the next screen choose (1) to create a primary partition on that drive.
4. Select (y) if you wish to use all the space on the drive for this one partition(which we don’t want to), or (n) if you wish to make more than one partition on the drive now or later. If you selected (n), enter the amount of space you wish to use for the primary partition.
5. By selecting (n) it means that you do want to create multiple partitions, you must now make a secondary partition using the rest of the free space.

6. Press (1) to create another partition, then (2) to create an extended DOS partition. While it gives you an option to use less than full amount of space on the disk here but any space which is not allocated now can no longer be used by FDISK unless you erase the existing partitions. So accept the default (maximum available) size for the extended partition, then press ‘ESC.’ This will take you to the menu for creating logical drives in the extended partition

7. To create a logical drive which are represented by drive C: or D: etc, simply fill in the amount of space you require the drive to have.
After you finished performing all this procedure, Exit from FDISK, reboot to windows.

PARTITIONING YOUR HARD DRIVE IN WINDOWS 2000/XP

Partitioning Your Hard Drive In Windows 2000/XP

To start partitioning in Windows 2000/Xp environment, right click My Computer and select Manage, once you enter into the Manage screen, from here select Disk Management.

This main screen will show you the existing drives with the new ones. At this instance Windows usually open up a wizard to help partition and format your new drive. If it does not, right click the new drive in the lower pane and select initialize drive.

Now you can partition your drive by following these steps.

1. Right click on the new drive and select new partition, then it will launch the partition wizard.

2. In this step it will then prompt you how much drive space you want to allocate to the new partition.

3. If you choose not to use the full amount of space for the first partition, you can create additional partitions in the same way up to a maximum of four partitions per disk.

4. Now it will ask for a drive letter which Windows will use to represent partition as C: or D: etc.

5. Once you’ve created the partitions, you’ll have to format the newly created partitions which Windows will prompt to do automatically.

6. Once formatting is complete, reboot your computer, and you’re done

HARD DISK PARTITIONING AND FORMATTING PROCEDURE

Hard Disk Partitioning and Formatting Procedure

This procedure describes how to set up a new, empty hard disk so that it is ready for an operating system to be installed on it. This process includes partitioning and formatting and results in a bootable hard disk. The procedure covers configuring the hard disk as a single large partition or splitting it into multiple, smaller partitions. The procedure provides specific instructions for using the FDISK program and is based on the Windows 95 OEM SR2 (Windows 95B) FDISK version with FAT32 support.

Warning: This procedure is intended to be used for setting up a new hard disk containing no information on it. Do not follow these steps if your hard disk has already been partitioned and formatted, or data loss will likely result.

Procedure Overview:
• Difficulty Level: 2 (Low).
• Risk Factor: 1 (Very low). This assumes that the hard disk has no data on it.
• Hardware Required: None.
• Software Required: Boot disk containing the FDISK.EXE and FORMAT.COM programs.
• Time to Perform: 5 to 20 minutes, depending on the size and speed of the hard disks.

Preparation / Warnings:

o To be safe, always run FDISK from DOS only.

o Be extremely careful when using the FDISK program, as one incorrect keystroke can result in major data loss. In particular, in a system with multiple hard disk drives be careful to make sure you are working on the right physical disk or you may accidentally end up disturbing the contents of the wrong drive. Beware that DOS drive letters can change after creating or deleting partitions, and that with multiple hard disks the partitions may be lettered in an unexpected sequence. See here for more details on this.

o Do not perform this procedure until the system is in good working order. Resolve any hardware conflicts or

other issues before commencing. o I assume that the system has been turned on and booted from the floppy disk.

o FDISK uses binary megabytes when displaying drive and partition sizes, not decimal megabytes. See this explanation of the difference for details.

o All commands in DOS or within FDISK require you to press {Enter} to select them; I'm not going to repeat it a zillion times within the procedure below.

Procedure Steps:

1. Check Version Number: At the DOS prompt, enter the following command: "ver". The system will respond with the version of DOS/Windows you have booted. Make sure that this matches whatever you want to install on the hard disk. For Windows 95 OEM SR2 the version number will be "4.00.1111".

2. Plan Partitions: Decide how you want to partition your hard disk. In particular, for large hard disks under Windows 95 OSR2, decide if you want to set up your hard disk with a single large FAT32 partition, or several smaller FAT16 partitions. (You can of course mix these). I provide instructions for doing either of these, but cannot tell you how to set up your system. You must decide based on what makes sense for you. For assistance in making this decision, and more general information on partitioning, cluster sizes and related issues, refer to this section. Most people today prefer to set up a new system using a single FAT32 partition.

3. Run FDISK.EXE: From the command prompt, enter the command "fdisk". If you have a disk large enough to warrant the use of FAT32, you will be asked if you want to enable "large disk support". Enter "Y" if you want to enable FAT32, or "N" if you do not want to enable FAT32. If you do enable this, any partitions over 500 MB that you create will be FAT32. Note that if you do not enable FAT32, you will not be able to put your entire hard disk into one partition if it is greater than 2 GB in size.

If you decided to place your entire hard disk into a single partition, then follow this step:

4. Partition Hard Disk (Single Partition): Follow these steps to set up your hard disk:
A. Select from the FDISK menu "1. Create DOS partition or Logical DOS Drive".
B. Select "1. Create Primary DOS Partition". FDISK will verify drive integrity. Then it will ask if you want to use the maximum available size of the disk for the primary partition and set it active. Enter "Y". The system will allocate the whole disk to the partition, and that's that.
C. Press {Esc} to exit FDISK.

If instead you want to set up your hard disk with multiple partitions (or if you don't have Windows 95 OEM SR2), follow this step. In order to make the process easier to follow, I am going to use an example below. In the example, a 3100 (binary) MB hard disk is being partitioned into four partitions of 1000 MB, 800 MB, 700 MB and 600 MB respectively:

4. Partition Hard Disk (Multiple Partitions): Follow these steps to set up your hard disk:
A. Select from the FDISK menu "1. Create DOS partition or Logical DOS Drive".
B. Select "1. Create Primary DOS Partition". FDISK will verify drive integrity. Then it will ask if you want to use the maximum available size of the disk for the primary partition and set it active. Enter "N". The system will show the size of the entire disk in MB.
C. Enter the size of the primary partition. In our example, this would mean entering "1000". The system will tell you that it has created the primary partition, and will assign it the drive letter "C:".
D. Press {Esc} to return to the FDISK menu.
E. Select "2. Set active partition". Select partition 1. FDISK will report that it has set partition 1 active.
F. Press {Esc} to return to the FDISK menu.
G. Select from the FDISK menu "1. Create DOS partition or Logical DOS Drive".
H. Select "2. Create Extended DOS Partition".
I. When prompted, press {Enter} to select the entire remaining area of the disk for the extended DOS partition. FDISK will report that it has created the extended DOS partition.
J. Press {Esc}. FDISK will automatically prompt you to create your first logical DOS volume within the extended DOS partition.
K. Enter the size of the first logical partition (the second partition overall). In our example you would enter "800". FDISK will create the partition, label it "D:", and then say "Logical DOS Drive created, drive letters changed or added". Don't touch anything, just wait, and FDISK will prompt you for the next volume.
L. Repeat the previous step for the remaining partitions (in our example there would be two more partitions to create, the 700 MB and 600 MB ones). When all of the partitions have been created, FDISK will report "All available space in the Extended DOS Partition is assigned to logical drives".
M. Press {Esc} to exit FDISK.

Continue with the procedure:

5. Reboot: Reboot the system using either the Reset button or the "three-fingered salute" ({Ctrl}+{Alt}+{Delete}). Make sure the floppy disk is in its drive, since you still need it. Note that you may get "Invalid media type reading drive C" errors while rebooting. This is normal at this stage.

6. Format Primary Partition: From the "A:" DOS prompt, issue the following command: "format c:/s". Do not forget the "/s", as this is what will make your C: drive bootable. You will get a "scary" warning message such as "WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE C: WILL BE LOST. Proceed with Format (Y/N)?". Since of course there is no data presently on drive C:, just enter "Y" and the system will format the hard disk. The program will show you its progress as it formats and at the end will prompt you for a volume label. Enter one if you wish.

7. Format Additional Partitions (if necessary): If you set up multiple partitions, format the additional partitions now. This is done in almost the same way as formatting the primary DOS partition, except that you leave off the "/s". So normally you would be entering "format d:", "format e:" and so on, until all the partitions have been formatted. The prompts should be the same as in the preceding step.

Warning: If you have a second hard disk in the system and it has a primary DOS partition, that partition is probably assigned D: because DOS assigns letters to all primary partitions before any logical partitions. Be careful of what you format.

8. Remove Boot Floppy: Eject the boot floppy from the floppy disk.

9. Reboot: Reboot the system using either the Reset button or {Ctrl}+{Alt}+{Delete}. The system should boot up from the hard disk this time, and stop at the "C:" prompt. Note that if you get an error such as "NO ROM BASIC, SYSTEM HALTED" or "No boot device found" at this stage, this means you forgot to set the primary DOS partition "active". Reboot from the floppy, run FDISK again and use option 2 to set the primary partition active, then reboot. If you get an error like "No operating system", this means you probably forgot the "/s" parameter when formatting the C: drive. Put the floppy disk back in the drive and then return to step 5.

HOW TO PARTITION A HARD DRIVE

Hard disks can be partitioned to run separate operating systems on the same disk, or to break down a disk into manageable chunks for storage. Partitioning is performed on a new or reformatted disk. These instructions describe using FDISK for PCs using Windows XP or later

Instructions

Step 1 Start the computer in Command Prompt Mode.

Step 2 Type "FDISK." The partition window will appear with menu options.

Step 3 Enter 5 if you're partitioning a second drive, and select the drive; otherwise, skip to the next step.

Step 4 Enter 1 (Create DOS Partition or Logical DOS Drive).

Step 5 Enter 2 (Create Extended DOS) to create a partition.

Step 6 Enter N when the program asks if you want to use the maximum available size.

Step 7 Designate the amount of disk space to allocate to the second partition (the partition will be assigned the next drive letter).

Step 8 Type a name for the new partition and press Enter. The partition menu will appear.

Step 9 Repeat steps 5 through 8 to create additional partitions.

Step 10 Press Esc to exit the partition command.

Tips & Warnings

• Be sure to allocate ample disk space (about 20 GB) on the C drive to hold Windows software and temp files created by other software programs.
• Commercial products, such as Partition Magic, make hard disk partitioning much easier.
• The FDISK procedure deletes all files on the hard disk. This action is not reversible. Be sure to back up any files you want to keep.
• If the disk capacity displayed in the FDISK menu doesn't match your hard drive, then your system doesn't support larger disk drives. Use disk management software, such as Disk Manager or EZ-Drive, to provide support for larger drives.
  

HOW TO DELETE A VIRUS WITHOUT AN ANTI-VIRUS PROGRAM

Want to delete viruses without spending lots of money on a decent Anti-Virus? Read up

Instructions

Step 1 Click on "START". Click on "RUN" and type "REGEDIT".

Step 2 Now you will see "registry editor" opened in a new window. In registry editor select -> HKEY_LOCAL_MACHINE.

Step 3 Now under "HKEY_LOCAL_MACHINE" select--->"SOFTWARE"--->"Mcft"--->"WINDOWS"--->"CurrentVerison"--->"RUN".

Step 4 Now on the right side select"RavTimeXP"Right click on "RavTimeXP" and delete it.Close REGISTRY EDITOR and restart your computer.

Step 5 Click on START--->SEARCH--->"FOR FILES OR FOLDERS".Search box will open with current setting.Now click on search(searching for .exe), after searching is finished you will see the results.

Step 6 Now here you have to delete the icons like folders and size 60KB or a little more than 60 KB or little less than 60 KB, and the file type will be "APPLICATION".Now delete them all.(Note, Remember to double click, otherwise you will have to restart and start from step 1)

Step 7 Now Empty Recycle Bin. And you are done.

HOW TO RECOVER DELETED ITEMS FROM A HARD DRIVE

If you have accidentally deleted files from your computer, or lost them because of a hard drive crash, the good news is you can recover them. Recently deleted files can be traced, and recovered using a free, easy to use recovery program.Recuva Data Recovery uses a simple but effective wizard system that searches for images, documents, music and video files that have been deleted, erased or lost on your PC hard drive.

Instructions

Things You'll Need:Recuva Data Recovery program

Step 1 Download Recuva Data Recovery (see Resources). Follow the setup and installation instructions to install it to your computer.

Step 2 Launch Recuva. The recovery wizard window will open up.

Step 3 Click "Next" on the recovery window, then select the file type you want to search for by file extension--for example .mp3, .jpg or .doc. Click "Next."

Step 4 Select your hard drive from the "File Location window, then click "Next." Click the "Enable Deep Scan" check-box if you want a more detailed scan. This option can take hours to scan, but has a better chance of locating your file.

Step 5 Click "Start" to begin the search. When it is complete, your traced files will be listed on a new window.

Step 6 Check the files you want to recover, then click "Recover" on the lower right of your program. Select a location to recover your files to, then click "OK" to finalize the recovery process.

TIPS TO IMPROVE SYSTEM SPEED

Tips To Improve System Speed


When installing new Softwares disable the option of having a tray icon. The tray icons use up available RAM, and also slow down the booting of your PC. Also disable the option of starting the application automatically when the PC boots. You can disable these options later on also from the Tools or preferences menu in your application
-------------------------------------------------------------------------------
Always make two partitions in your hard drive. Install all large Softwares (like PSP, Photoshop, 3DS Max etc) in the second partition. Windows uses all the available empty space in C drive as virtual memory when your Computer RAM is full. Keep the C Drive as empty as possible.
------------------------------------------------------------------------------
Defragment your hard drive once every two months. This will free up a lot of space on your hard drive and rearrange the files so that your applications run faster.
---------------------------------------------------------------------------------
Delete the temporary internet files regularly
--------------------------------------------------------------------------------
Empty the recycle bin regularly. The files are not really deleted from your hard drive until you empty the recycle bin
--------------------------------------------------------------------------------
Refresh the desktop after closing any application. This will remove any unused files from the RAM.